TD-8816B
ADSL2+ Modem Router User Guide
39
)
Note:
If you want to make the rule take effect, please select
Yes
to active the rule.
Step 3:
Enter the “Source IP Address”, “Destination IP Address”, “Subnet Mask” and “Port
Number” in the corresponding field.
Step 4:
Select the Protocol as “TCP” and select the Unmatched rule as “Next”.
Step 5:
Finally, click the
SAVE
to save the entry.
Step 6:
Go to Step 2 to configure the next two rules: Block E-mail received by the IP address
192.168.1.7 on your local network; Make the PC with IP address 192.168.1.8 unable to
visit the website of IP address 202.96.134.12.
)
Note:
After you complete the IP filter rules for the example, the Filter list will show as follows. You can
enter the
IP / MAC Filter Set Index
to view the information about the rule.
Other configurations for the entries as shown in Figure 4-29:
Enter the
IP / MAC Filter Set Index
and
IP/MAC Filter Rule Index
to view or modify the entry.
Enter the
IP / MAC Filter Set Index
and
IP/MAC Filter Rule Index
to locate the specific rule, and
then click the
DELETE
button to delete the entry.
4.5.2.2. MAC Filter
Select
IP/Mac Filter
as the Filter type, and select
MAC
as the Rule type (shown in Figure 4-30),
then you can configure the filter rules based on MAC address.
