Choose the menu
Switching
→
Port Trunk
to load the following page.
Figure 5-3 Trunk Group Setting
Here you can configure and view the port parameters.
Trunk Group Setting
Group ID:
Select an identified number for the trunk group from the
drop-down list.
Port:
Select the port as the trunk group member. It is multi-optional.
Clearing all the ports of the trunk group will delete this trunk group.
Tips:
Calculate the bandwidth for a trunk group: If a trunk consists of the four ports whose Speed/Duplex
mode is 1000Mbps/Full Duplex, the whole bandwidth of the trunk group is up to 8000Mbps
(2000Mbps * 4) because the bandwidth of each member port is 2000Mbps counting the up-linked
speed of 1000Mbps and the down-linked speed of 1000Mbps.
19
