TP-Link L-SG1024DE, Руководство пользователя

Страница: 13 / 48


LEDs
Name Status Indication
Power
On Power is on.
Flashing Power supply is abnormal.
Off Power is off or power supply is abnormal.
1000Mbps
On A 1000Mbps device is connected to the corresponding port.
Flashing Data is being transmitted or received.
Off
A 10/100Mbps device or no device is connected to the
corresponding port.
10/100Mbps
On A 10/100Mbps device is connected to the corresponding port.
Flashing Data is being transmitted or received.
Off No device is connected to the corresponding port.

TL-SG108PE
The front panel of TL-SG108PE is shown as Figure 2-3.
Figure 2-3 Front Panel of
TL-SG108PE
The following parts are located on the front panel of the switch:

Reset:
With the switch powered on, press this button for five seconds or above to reset the
software setting back to factory default setting.

1000Mbps Ports:
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or
1000Mbps. Each has a corresponding Link/Act LED (Left LED).For Port 1– 4, each of them
also has a PoE Status LED (Right LED).
 LEDs
Name Status Indication
Power
On Power is on.
Flashing Power supply is abnormal.
Off Power is off or power supply is abnormal.
PoE Max
On The total power supply< 55W.
Flashing The total power supply ≥ 55W.
Off The total power supply< 46W.
Link/Act
On(Green) A 1000Mbps device is connected to the corresponding port.
On(Yellow) A 10/100Mbps device is connected to the corresponding port.
Flashing
Data is being transmitted or received.
Off No device is connected to the corresponding port.
5