69
Chapter 12
Customize Your Network Settings
2 ) Click
Save
.
3 ) After configuring IGMP proxy, IPTV can work behind your
router now. You can connect your set-top box to any of
the router’s Ethernet port.
If IGMP is not the technology your ISP applies to provide
IPTV service:
1 ) Tick
Enable IPTV
.
2 ) Select the appropriate
Mode
according to your ISP
.
• Select
Bridge
if your ISP is not listed and no other
parameters are required, and then skip to Step 4.
• Select
Custom
if your ISP is not listed but provides
necessary parameters.
3 ) After you have selected a mode, the necessary parameters
are predetermined. You can perform other configuration,
e.g. enter the
IPTV Multicast VLAN ID
and select the
IPTV
Multicast VLAN Priority
in
Russia
mode according to your
ISP.
4 ) For Russia, Singapore-ExStream, Malaysia-Unifi and
Malaysia-Maxis mode, connect the set-top box to the
predetermined LAN port. For Bridge and Custom mode,
select the
LAN
type and connect the set-top box to the
corresponding port.
5 ) Click
Save
.
Your IPTV setup is done now! You may need to configure your
set-top box before enjoying your TV.
Tips
Qos and IPTV cannot be enabled at the same time.
Done!
Downloaded from
