Archer C20i
AC750 Wireless Dual Band Router
- 39 -
)
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a WPS button.
Step 1:
Press the
WPS/Reset
button on the side panel of the router, as shown in Figure 4-17.
You can also keep the default WPS status as
Enabled
and click the
Add device
button
in Figure 4-16. Then choose “
Press the WPS button of the new device within the
next two minutes
” and click
Connect
, shown in Figure 4-18.
Figure 4-17
Figure 4-18 Add A New Device
Step 2:
Press and hold the
WPS
button of the client device.
Step 3:
The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
process.
Step 4:
When the WPS LED is on, the client device has successfully connected to the router.
