manUal
A
INSTALLINg THE HEATER
1 Carefully remove your heater from the box and check the contents.
In addition to the heater you also need to have:
a manual fuel pump
a transportation cap
these directions for use
Keep the box and the packaging materials (Fig. A) for storage and/or
transportation.
2 Remove the other packaging materials:
Remove the packaging material from the grill
. Lift the grill from the slot
(Fig. B) and pull it forward.
Push the packing material on top of the combustion chamber
slightly
down and remove it (Fig. C). Remove the packaging materials from under
the combustion chamber as well (Fig. D).
Put the combustion chamber back into its place. The combustion chamber
is positioned correctly when it can be smoothly moved a little to the left
and to the right by its handle
(Fig. E). Close the grill: Slightly lift it to
reposition it in its slot.
Open the lid of the removable tank
and remove the piece of cardboard.
3 Fill the removable tank as indicated in
Section B
.
4 Insert the batteries into their holder
at the back of the heater (Fig. F).
Ensure that the positive and negative poles match the + and - marks indicated
on the battery housing.
5 The floor should be firm and completely level. Reposition the heater, when it
is not level. Do not correct the situation by placing books or other goods
under the heater.
6 Your heater is now ready for use.
4
5
A
B
C
D
E
F
Содержание zibro RS - 24
Страница 14: ...1 3 cm 4 14 R...
