Toyotomi LC-44, Инструкция по эксплуатации

Страница: 8 / 16

7
TEMPERATURE REGULATION
1. Use the Adjustment keys (
t
hour/
s
min.) to adjust the
temperature.
2. Adjust the temperature using the key on the right (
s
min.) to set
the temperature to a higher setting and the key on the left
(
t
hour) to lower the temperature.
3. Until the room temperature has reached the set temperature, the heater will burn at either
high or medium burning mode. When the room temperature reaches or slightly exceeds
the set temperature, the heater will automatically shift to maintain the desired
temperature.
NOTE: The standard setting of the heater is 20ºC. However, once the set temperature
has been changed the new setting will remain in effect unless changed.
NOTE: Room temperature measurements are taken directly behind the heater. These
measurements may not represent the true room temperature.
1 2
SAVE OPERATION
The “ SAVE ” function allows you to limit the temperature. When this
function is activated, the heater will automatically switch off, when
the room temperature exceeds the set temperarure by 3ºC.
Subsequently, when the room temperature has dropped again to
the set temperature, the heater will automatically switch on again.
Activate the
“ SAVE ” setting by pressing the Save key. The Save
indicator will light up. Switch off the function by pressing the Save
key once again.
NOTE: Without the “ SAVE ” setting your heater will maintain the set temperature by
approximation as well, by adjusting its heating capacity. “ SAVE ” is an economy
setting, which you can use when, for instance, you are not present in the room or to
keep it frost-free.