Toyotomi LC-44, Инструкция по эксплуатации

Страница: 5 / 16

4
FUELING
1. Open the fuel tank lid on the top of heater cabinet and lift out the
removable fuel tank. Turn the removable tank upside down and
remove the fuel tank cap.
2. Insert the straight tube of the manual siphon into the jerrycan;
insert the siphon’s flexible hose into the removable fuel tank
opening.
3. Turn the air vent knob on the top of the siphon clockwise to close
the vent. Start the flow of kerosene (paraffin) by squeezing the
bulb of the siphon vigorously six or seven times. Once flow
begins, it is no longer necessary to squeeze the bulb.
4. Check the removable tank fuel gauge while filling the tank. Stop
filling by loosening the switch button on top of the pump (turn
anti-clockwise), once the gauge indicates that the tank is full.
Never overfill the tank, especially not when the fuel is very cold
(fuel expands when it heats up).
NOTE: Be careful to avoid overfilling the tank, especially with
very cold kerosene (paraffin). Overflow might occur due
to expansion when the fuel warms up.
5. Remove the siphon carefully, allowing excess kerosene (paraffin)
to drain from the tube back into the jerrycan. Replace fuel tank
cap and tighten it securely. Be sure to wipe away any spilled
kerosene (paraffin) from tank and other heater parts.
6. After making sure fuel tank cap is tightly fastened, invert tank and
replace into heater body.
WARNING : Use only water-clear kerosene (paraffin).
Never use gasoline or other flammable
liquids.
ALWAYS extinguish heater before refill heater
fuel tank.
Fuel heater outside the living area.
empty full
GASOLINE