Toyotomi KENTO Series, Руководство пользователя

Страница: 37 / 48

37
GB
DEHUMIDIFIER
3. Press the to set the high/low fan speed. Fan speed lamp will work
on.
Press the for 3-5seconds to set the sleep mode. The fan speed
will change to low speed. The PCB will display the Sleep lamp only after
10seconds.
The sleep function can only be set under the dehumidifying mode. The
humidity level can be set between 55-60-65%.
The fan speed can be adjusted under the dry mode, when the room
humidity is more than 55%, then fan speed is set in high speed. If the room
humidity is under 50%, then fan speed is set in low speed.
Between 50-55%, fan speed will be automatically adjusted into high/low
fan speed.
4. Press the to adjust the humidity setting level: The humidity setting
level is 40% in the dehumidifying mode.
Press the key to adjust the humidity from 40-80%, every setting is 5%.
The LED will show the setting humidity when adjusting.
The unit compressor will auto stop working when the Room Humidity will
reach Setting Humidity- 2 - 5%, but the fan will keep working. If the room
humidity will reach room tempe2 - 5%, then the unit compressor
will re-start to work on after 3minutes auto-protection.
If the compressor will stop to work more than 3 minutes when the room
humidity is still lower than the setted humidity and the fan will be auto
turned off.
The humidity cannot be adjusted in dry mode and program seted humidity
is 30%
5. Press the to set the timer function:
Press the to set the auto turn-on time when the unit is in stand-by
mode and switched on. The LED will display the time set from 1-12hours,
so the unit will auto turn on after the seted time.
Press the to set the auto turn-off time when the unit is in working
function. The LED will display the time set from 1-12hours, so the unit will