Toyotomi HTG-09IV, Руководство пользователя

Страница: 35 / 116

35
GB
Installation of outdoor unit
Step four: connect indoor and outdoor pipes
1. Remove the screw on the right han-
dle of outdoor unit and then remove
the handle.
2. Remove the screw cap of valve and
aim the pipe joint at the bellmouth of
pipe.
3. Pretightening the union nut with
hand.
4. Tighten the union nut with torque
wrench by referring to the sheet
below.
gas pipe
liquid pipe
liquid
valve
gas valve
union nut
pipe joint
Hex nut diameter Tightening torque
(N.m)
ĭ
ĭ
ĭ
ĭ
ĭ
30~40
a
a
a
a
1. Remove the wire clip; connect the po
wer connection wire and signal control
wire (only for cooling and heating unit)
to the wiring terminal according to the
handle
screw
Indoor unit connection Indoor unit connection
L N
2 3 N(1)
N
L
POWER blue
blue
brown(black)
black brown yellow-
green
yellow- green
、
12
、
17K Cool only type and Heat
21K Cool only type and Heat pump type
pump type
：
(for some model 2 3 L
L
N
N N(1)
POWER
blue blue black
(black)
brown brown
yellow-
green
yellow-
green