Toyotomi DCT 100HSPi, Руководство по обслуживанию

Страница: 40 / 48

Installation
Installation
wrong right
Gas pipe and liquid pipe
should
Insulate the gas pipe
(cooling only)
Insulate the gas pipe and
liquid pipe
For construction convenience, before laying pipes, use insulation material to insulate the pipes to be deal with,
at the same time, at two ends of the pipe, remain some length not to be insulated, in order to be welded and
check the leakage after laying the pipes.
5.2.3. Insulate for the jointing area, expanding area and the flange area
ķ Insulate for the jointing area, expanding area and the flange area should be done after checking leakage of
the pipes
ĸ 0DNH VXUH WKHUH¶V QR FOHDUDQFH LQ WKH MRLQLQJ SDUW RI WKH DFFHVVRULDO LQVXODWLRQ PDWHULDO DQG ORFDO
preparative insulation material.
5.3 Drainage pipe insulation
The connection part should be insulated, or else water will be condensing at the non-insulation part.
5.4 Note
5.4.1 The jointing area, expanding area and the flange area should be heat insulated after passing the
pressure test
5.4.2 The gas and liquid pipe should be heat insulated individually, the connecting part should be heat
insulated individually.
5.4.3 Use the attached heat-
LQVXODWLRQPDWHULDOWRLQVXODWHWKHSLSHFRQQHFWLRQVSLSHV¶WLH
-in ,expand nut ) of
the indoor unit