How to Identify T2wG and Device
How to access the Service Menu
How to access the Repair Manual
How to install latest softwares
3-
Reboot of the DA-unit (showing loading icon) during cranking of the engine
Phenomenon description:
When ignition switch is turned ON a start-up screen:
-
Loading screen is continuously loading
-
"HYBRID synergy drive" logo can appear
-
Buttons on touch screen are inoperative
Supplier: Fujitsu Ten / Denso Ten
This phenomenon can occur on the following vehicles (see table) on DA software lower than
mentioned in below table.
The problem has been resolved as from the software version shown below table or higher.
Vehicle Model
Minimum Required Software Version
Hilux
FE3063
Verso S
FE3063
Yaris
XE3934
Alphard
XE3934
Hilux MY2015
XE3934
Camry, depends which DA-unit type fitted
GE3934 / VE3934
C-HR
VE3934
How to fix:
Install latest released DA Software. (See hyperlink on the bottom of the page)