Toyota TAS500, Руководство пользователя

Страница: 42 / 46

41
10. Rear View Monitor System
Things you should know
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by
your Toyota dealer or another duly qualified and equipped professional.
Symptom Likely cause Solution
The image is
difficult to see
z
The vehicle is in a dark area.
z
The temperature around the
lens is either high or low.
z
The outside temperature is
low.
z
There are water droplets on
the camera.
z
It is raining or humid foreign
matter (mud etc.) is adhering
to the camera.
z
Sunlight or headlights are
shining directly into the cam-
era.
z
The vehicle is under fluo -
rescent lights, sodium lights,
mercury lights etc.
Back up while visually
checking the vehicle’s sur-
roundings. (Use the monitor
again once conditions have
been improved.)
The image is
blurry
Dirt or foreign matter (such as
water droplets, snow, mud etc.)
is adhering to the camera.
Flush the camera with a
large quantity of water and
wipe the camera lens clean
with a soft and wet cloth.
The image is out
of alignment
The camera or surrounding area
has received a strong impact.
Have the vehicle inspected
by your Toyota dealer or
another duly qualified and
equipped professional.
The fixed guide
lines are very far
out of alignment
The camera position is out of
alignment.
Have the vehicle inspected
by your Toyota dealer or
another duly qualified and
equipped professional.
z
The vehicle is tilted (there is a
heavy load on the vehicle, tyre
pressure is low due to a tyre
puncture, etc.).
z
The vehicle is used on an
incline.
If this happens due to these
causes, it does not indicate
a malfunction.
Back up while visually
checking the vehicle’s sur-
roundings.