Toyota SP100 Series, Инструкция по эксплуатации

Страница: 37 / 54

37
3
Sewing
1
Overcasting
This is a sewing method that prevents unraveling at the edge of the fabric.
2
2
Change to the zigzag sewing foot or the overcasting foot.
Note:
Select pattern when sewing thin fabric.
(For details on changing the presser foot, refer to “Changing the presser
foot” on page 24.)
Caution
Before changing the presser foot, use the main power switch to turn
off the sewing machine.
Not doing so could result in injury.
6 10
6 14 15 16
Right needle entry
point
Position the fabric so that the
needle extends slightly off the
edge of the fabric when the
needle moves to the right.
Sew with the edge of the fabric
against the guide on the foot.
Guide
z When using the zigzag sewing foot
z
When using the overcasting foot
Caution
Do not use stitch with the overcasting foot.
Doing so may cause the needle to hit the presser foot and break or result in
injury.
Zigzag sewing foot
Overcasting foot
* The overcasting foot is only
included with model
SuperJ15 / 17 / SPJ17XL /
SUPERJEANS / PowerFab17.
15 stitch programmes
17 stitch programmes