Toyota SP100 Series Скачать руководство пользователя страница 4

Страница: 4 / 54

Caution

:KHQWKHPDFKLQHLVQRWLQXVHLWVKRXOGEHVWRUHGVDIHO\QRWRQWKHÀRRU

as protruding parts could cause injury if a person fell on the machine.

Failure to observe this precaution could result in injury.

Do not look away from the needle while operating the sewing machine.

If the needle breaks it could result in injury.

Do not touch moving parts such as the needle, take-up lever or handwheel.

Doing so could result in injury.

'RQRWSODFH\RXUKDQGRU¿QJHUVXQGHUWKHQHHGOH

Doing so could result in injury .

Before changing the needle or threading the lower thread or upper thread,

XVHWKHPDLQSRZHUVZLWFKWRWXUQRႇWKHVHZLQJPDFKLQH

Not doing so could result in injury.

Be sure to close the bobbin case cover before operating the sewing machine.

Not doing so could result in injury.

Before using the sewing machine make sure that the presser foot holder

FODPSVFUHZQHHGOHFODPSVFUHZDQGQHHGOHSODWHVFUHZDUH¿UPO\

tightened, and that the presser foot is properly set in the presser foot
holder.

Not doing so could result in injury.

Do not use when young children are in the vicinity.

Children must not be permitted to play with the machine as they could touch the
needle and be injured.

When leaving the sewing machine after using it, use the main power switch

WRWXUQRႇWKHVHZLQJPDFKLQHDQGWKHQUHPRYHWKHSRZHUSOXJIURPWKH

outlet.

Not doing so could result in injury.

Do not perform the following actions.

Doing so could result in injury.

Sewing without lowering the presser foot.

Sewing while the needle is incorrectly installed.

Using a bent needle.

Sewing while jerking the fabric.

Moving the pattern selection dial while sewing.

Содержание SP100 Series























































Результаты поиска

Содержание SP100 Series

Отзывы:

Похожие инструкции для SP100 Series

Бренды по названию

Популярные бренды

Toyota SP100 Series, Инструкция по эксплуатации

Результаты поиска

Содержание SP100 Series

Отзывы:

Похожие инструкции для SP100 Series

Бренды по названию

Популярные бренды