Toyota Sequoia guide, Руководство пользователя

Страница: 292 / 566

292
4-5. Using the driving support systems
SEQUOIA_OM_USA_OM0C011U
■
Automatic leveling function
Regardless of the number of occupants or the luggage load, vehicle height in
any mode is always adjusted to a fixed height by the automatic leveling func-
tion.
■
When “HI” mode is selected
The vehicle height will change to “N” mode when driving at the speeds of
18 mph (30 km/h).
■
When “LO” mode is selected
●
The vehicle height will change to “N” mode when vehicle speed exceeds
7 mph (12 km/h).
●
This mode allows for easy access to the vehicle (getting in and out) and
easy loading and unloading.
■
The electronically modulated air suspension will not operate in the fol-
lowing cases:
●
The underbody of the vehicle is touching the surface of the road.
●
The area around the suspension is covered with ice.
The height control indicators will blink, turn off and then turn on continuously
to indicate that the electronically modulated air suspension is not operational.
To re-enable operation, turn off the engine and then restart it.
■
Even if you hear an operating noise
This does not indicate a problem in the electronically modulated air suspen-
sion.
■
The electronically modulated air suspension failure warning
The warning message is displayed on the multi-information display, and the
electronically modulated air suspension cannot be activated until the malfunc-
tion is corrected.
Stop the engine and start again. If the warning message turns off, the system
operating correctly. If the warning message continues to be displayed, have
your vehicle inspected by your Toyota dealer as soon as possible.