Toyota Sequoia guide, Руководство пользователя

Страница: 107 / 566

107
3-2. Opening, closing and locking the doors
3
Op
eration
o
f each
compo
nen
t
SEQUOIA_OM_USA_OM0C011U
The following functions can be set or canceled:
For instructions on customizing, refer to P. 520.
■
Setting and canceling the functions
To switch between setting and canceling, follow the procedure
below:
Close all the doors and turn the engine switch to the “ON” posi-
tion. (Perform step 2 within 20 seconds.)
Shift the shift lever to P or N,
and press and hold the
driver’s door lock switch
(
or ) for approxi-
mately 5 seconds and then
release.
The shift lever and switch posi-
tions corresponding to the
desired function to be set are
shown in the following table.
Use the same procedure to cancel the function.
Automatic door locking and unlocking systems
Function Operation
Speed linked door locking function
All doors are automatically locked
when vehicle speed is approxi-
mately 12 mph (20 km/h) or higher.
Shift position linked door locking
function
All doors are automatically locked
when shifting the shift lever to posi-
tion other than P.
Shift position linked door unlocking
function All doors are automatically unlocked
when shifting the shift lever to P.
Driver’s door linked door unlocking
function
All doors are automatically unlocked
when driver’s door is opened within
10 seconds after turning the engine
switch to “ACC” or “LOCK”.
1
2