WWW.MANUALS.WS
WWW.MANUALS.WS
185
To prevent burning yourself, do not
check the washer fluid level when
the engine is hot.
CAUTION
!
NOTICE
After checking the washer fluid
level, make sure the dipstick is se-
curely reinserted. If it is loose,
fluid may leak from the reservoir.
Do not check the washer fluid lev-
el or add washer fluid when the en-
gine is running or when it is hot.
If the fluid is spilled over the hot
engine, a fire could result.
If you have added washer fluid un-
til it is close to the top of the open-
ing for adding fluid, do not pull
out the dipstick. Otherwise, the
fluid will overflow.
Do not use engine antifreeze or
any other substitute because it
may damage your vehicle’s paint.
The headlights have the beam angle
gauges to check:
1. Vertical movement
2. Horizontal movement
To obtain correct gauge readings, do
these before you check the headlight
aims.
Make sure the body around the head-
light is not deformed.
Park the vehicle on a level spot.
Fill up the fuel tank.
Bounce the vehicle several times.
A passenger should sit on the driver’s
seat while checking the headlight aims.
Vertical movement gauges: The bubble
on the gauge should be within six marks
from center on both sides.
Checking headlight aims
