TOYOTA
MY22 TUNDRA
2022 -
DASHCAM
(Digital Video Recorder)
Procedure
Page 2 of 14 pages
Issue: B 11/19/2021
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this
accessory should follow approved guidelines to ensure a quality installation.
These guidelines can be found in the "Accessory Installation Practices" document.
This document covers such items as:-
•
Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).
•
Safety (eye protection, rechecking torque procedure, etc.).
•
Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).
•
Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).
Please see your Toyota dealer for a copy of this document.
1. Disconnect Battery
(a) Protect the fender / bumper before starting.
(b) The engine components and coolant may be
hot.
(c) Remove the vehicle’s 12V battery negative
terminal (Fig. 1-1).
(d) Do NOT touch or disconnect high voltage
systems on a Hybrid Vehicle.
CAUTION: Do not touch the positive terminal
with any tool during battery disconnection.
Gas Version Battery Disconnection:
(e) On the
Gas version
of the Tundra, the 12V
Battery is located in the engine compartment
in front of the passenger A-Pillar. (Fig. 1-2).
(f) Protect the Fender paintwork.
(g) Disconnect the Negative Cable by loosening
the 10 mm nut shown by the arrow. It is not
necessary to fully remove this nut. (Fig. 1-3)
(h) Keep the Negative Cable away from the
battery terminal to avoid accidentally
reconnecting the 12V power if the cable falls
back to its natural shape.
For the Hybrid version of the Tundra, see
detailed instructions on the following page.
Fig. 1-2
Fig. 1-1
Fig. 1-3
