TOYOTA
MY22 TUNDRA
2022 -
DASHCAM
(Digital Video Recorder)
Checklist - these points
MUST
be checked to ensure a quality installation.
Check:
Look For:
Page 14 of 14 pages
Issue: B 11/19/2021
Accessory Function Checks
Verify parts
Vehicle Startup
Power LEDs light up
Remove Blue Film on Dashcam Lens
Vehicle Function Checks
Standard exterior lights - low / high beams,
left / right turn signal, emergency signal
Roof Console functions – map lights,
sunroof / panoramic roof controls if
equipped.
EC Mirror – Confirm power and dimming.
Mirror – View Angle
TPMS Gauge Indicator
Removed items have been discarded &
replaced items are in place
Confirm Dashcam does not emit a
continuous beep on vehicle startup. If it
does, confirm SD card is installed
Blue Lens Protector Film should be
removed and discarded.
Confirm standard lighting functions work
properly.
Confirm roof console functions work
properly.
Confirm EC Mirror power status LED
visible, cover the transparent lens on the
reverse side with your hand, the mirror
glass should fade darker after a few
seconds.
Confirm mirror is adjusted correctly for
visibility for the average driver.
Prior to TPMS activation and PDS, the
TPMS light may blink when IG is on. After
activation and PDS, the TPMS light should
turn off when IG is on.
Vehicle Appearance Check
After accessory installation and removal of
protective cover(s), perform a visual
inspection.
All Templates and Tools removed from the
vehicle.
Ensure no damage (including scuffs and
scratches) was caused during the
installation process.
(For PPO installations, refer to TMS
Accessory Quality Shipping Standard.)
Confirm Windshield Template and all tools
have been removed from the vehicle.
