TOYOTA
COROLLA
2010–
TVIP V4
PROCEDURE
REMOTE ENGINE STARTER (RES)
Page 22 of 46
Issue: A 03/12/10
Secure the 8P Connectors
e)
to Vehicle Harness with
1 Wire Tie.
CAUTION:
Make sure the
Connectors and Harness
align properly.
Secure the V4 Harness to
f)
the Vehicle Harness with
1 Wire Tie.
NOTE:
Verify that the Steering
Column Tilts and Telescopes
without interference and there is
no tension on the connectors.
Route the V4 Harness
g)
through the Center Console.
On the Driver’s Side secure
h)
the V4 Harness to the Vehicle
Brace with 1 Wire Tie.
7) V4 harness Installation
(Passenger’s Side)
Secure the V4 Harness
a)
to the Vehicle Braces with
3 Wire Tie.
