TOYOTA
COROLLA
2010–
TVIP V4
PROCEDURE
REMOTE ENGINE STARTER (RES)
Page 28 of 46
Issue: A 03/12/10
Insert the Terminal on the
c)
WHITE/BLACK Wire of the
Hood Switch Harness into the
Connector.
Insert the Terminal on the
d)
GREEN/RED Wire of the
Hood Switch Harness into the
Connector.
VERIFY:
Terminal Pins are
properly inserted and do not
come out.
Close the Terminal Retainer
e)
Clip.
Re-Connect the V4 2P
f)
Connectors.
Wrap the 2P Connectors with
g)
1/2 Piece of Foam Tape.
Re-install the Vehicle’s ECU.
h)
GREEN/RED
WHITE/BLACK
Fig. 11-2