manualshive.com logo in svg

Toyota Lexusc, Руководство пользователя

Поделиться
Скачать
Toyota Lexusc Скачать руководство пользователя страница 451

STARTING AND DRIVING

432

BEFORE STARTING THE ENGINE

1. Check the area around the vehicle before entering it.

2. Adjust seat position, seatback angle, seat cushion height,
seat cushion angle, head restraint height and steering wheel
angle.

3. Adjust the inside and outside rear view mirrors.

4. Lock all doors.

5. Fasten seat belts.

6. Remember to check that the service reminder indicators
function when turning the key to “ON”, and check the fuel
gauge to see that you have sufficient fuel.

IGNITION SWITCH WITH STEERING

LOCK

“START” — Starter motor on.  The key will return to the
“ON” position when released.

For starting tips, see page 435.

“ON” — Engine on and all accessories on.

This is the normal driving position.

NOTICE

Do not leave the key in the “ON” position if the engine
is not running.  The battery will discharge and the
electronic ignition system could be damaged.

Содержание Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды