manualshive.com logo in svg

Toyota Lexusc, Руководство пользователя

Поделиться
Скачать
Toyota Lexusc Скачать руководство пользователя страница 353

AUDIO

334

2. Insert only one disc while the CD door is open.

You can set a disc at the lowest empty disc number.

After insertion, the set disc is automatically loaded.

If the label faces down, the disc cannot be played.  In this case,
“ERROR 1” and disc number appear on the display.

If you need to insert the next disc, repeat the same procedure
to insert another disc.

Setting all the discs:

1. Push the “LOAD” button until you hear a beep.

The umber indicators at both ends of the slot start blinking and
“WAIT” appears on the display.  After the blinking indicators
change to green and stay on, and “WAIT” changes to the
“LOAD”, the CD door opens.

2. Insert only one disc while the CD door is open.

The CD door closes and “WAIT” appears again.

3. Insert the next disc after the “WAIT” changes to the
“LOAD” and the CD door opens.

4. Repeat this procedure until you insert all the discs.

To cancel the operation, push the “LOAD” or “DISC” button.

If you do not insert discs within 15 seconds after pushing the
“LOAD” button and “LOAD” is displayed, the operation will be
canceled automatically.

Содержание Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды