manualshive.com logo in svg

Toyota Lexusc, Руководство пользователя

Поделиться
Скачать
Toyota Lexusc Скачать руководство пользователя страница 454

STARTING AND DRIVING

435

HOW TO START THE ENGINE

Before cranking

1. Apply the parking brake firmly.

2. Turn off unnecessary lights and accessories.

3. Put the selector lever in “P”.  If you need to restart the engine
while the vehicle is moving, put the selector lever in “N”.  A
starter safety device will prevent the starter from operating if
the selector lever is in any drive position.

4. Depress the brake pedal and hold it to the floor until driving
off.

Starting the engine

Before starting the engine, be sure to follow the instructions in
“Before cranking”.

Normal starting procedure

The multiport fuel injection system/sequential multiport fuel
injection system in your engine automatically controls the
proper air-fuel mixture for starting.  You can start a cold or hot
engine as follows:

With your foot off the accelerator pedal, crank the engine by
turning the key to “START”.  Release it when the engine starts.

Engine should be warmed up by driving, not in idle.  For
warming up, drive with the engine turning smoothly until engine
coolant temperature is within normal range.

Содержание Lexusc














































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды