Toyota COROLLA 2018, Краткое руководство пользователя

Страница: 26 / 52

24
p 243
p 243
CHANGING THE PCS ALERT TIMING
Far
Middle
(default)
Near
TOYOTA SAFETY SENSE ™
(1) Press “ ” switches and select from the MID.
(2) Press “ or ” switches and select the setting function from the MID
and then press “ ”. The setting screen is displayed.
(3) Select “Sensitivity” and then press “ .” Each time “ ” is pressed, the
response to the PCS alert timing changes as shown above. You can press “ ” to
go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On. The
system can be disabled/enabled and the alert timing of the system can be changed.
(Alert timing only, brake operation remains the same).
(1) Press the “DISP” switch to find , then press and hold to select.
(2) Press the “DISP” switch to find , then press and hold to select. The setting
screen is displayed.
(3) Press and hold the “DISP” switch to select
. The response to the PCS alert
timing changes timing changes as shown above.
Using the steering wheel controls & color MID
(1) Press “ ” switches and select from the MID.
(2) Press “ or ” switches and select the setting function from the MID
and then press “ ”. The setting screen is displayed.
(3) Select and then press “ .” The Pre-Collision System will be disabled.
You can press “ ” to go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On. The
system can be disabled/enabled and the alert timing of the system can be changed.
(Alert timing only, brake operation remains the same).
(1) Press the “DISP” switch to find , then press and hold to select.
(2) Press the “DISP” switch to find , then press and hold to select. The setting
screen is displayed.
(3) Press and hold the “DISP” switch to select
. The Pre-Collision System will
be disabled.
Using the steering wheel controls & color MID
Using the steering wheel controls & monochrome MID
Using the steering wheel controls & monochrome MID
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
In certain conditions, the PCS system included with the TSS-P package may also
help to detect a pedestrian in front of your vehicle. With Toyota Safety Sense™ P,
PCS uses an in-vehicle camera and front-grill mounted millimeter-wave radar to
help detect a pedestrian in front of your vehicle in certain conditions. The in-vehicle
camera of PCS detects a potential pedestrian based on size, profile, and motion of
the detected pedestrian. However, a pedestrian may not be detected depending
on the conditions, including the surrounding brightness and the motion, posture,
size, and angle of the potential detected pedestrian, preventing the system from
operating or engaging. Refer to a Toyota Owner’s Manual for additional information.
PEDESTRIAN DETECTION FUNCTION DISABLING THE PRE-COLLISION SYSTEM (PCS)
2018_Corolla_QRG_V4_ML_0801.indd 24 8/2/17 1:49 AM