Toyota COROLLA 2018, Краткое руководство пользователя

Страница: 12 / 52

10
Manual transmission
(if equipped)
Continuously variable transmission
(if equipped)
CHANGING GEAR STEPS IN THE M POSITION
TYPE A - WITHOUT PADDLE SHIFT SWITCHES
TYPE B - WITH PADDLE SHIFT SWITCHES
Lift up ring to shift into reverse
Park
1
Reverse
Neutral
Drive
Engine Braking
Maximum Engine Braking
S
B
P
R
N
D
1
The engine switch must be “ON” (without Smart Key) and “IGNITION ON” mode
(without Smart Key) and the brake pedal depressed to shift from Park.
For powerful acceleration and driving in mountainous regions.
Shift the shift lever to “M” position from “D” position.
+
: Upshifting
-
: Downshifting
Downshifting increases power going uphill, or provides engine braking downhill. For
best fuel economy during normal driving conditions, always drive with the shift lever
in the “D” position.
Refer to the Owner’s Manual for more details.
Park
1
Reverse
Neutral
Drive
“M” position*
P
R
N
D
M
+
+
-
-
* For more information about
changing gears in the “M”
position, refer to your Owner’s
Manual.
FEATURES & OPERATIONS
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-(With Smart Key system) Doors lock when the vehicle speed goes above
approximately 12 mph.
Driver’s door linked door unlocking function
-(Without a Smart Key system) Doors unlock when the driver’s door is opened
within 45 seconds after turning the ignition switch to the “ACC” or “LOCK” position.
-(With a Smart Key system) Doors unlock when the driver’s door is opened within
45 seconds after turning the “ENGINE START STOP” switch to ACCESSORY mode
or OFF.
Refer to the Owner’s Manual for more details.
NOTE: Do not attempt to adjust while the vehicle is in motion.
Lock release lever
2018_Corolla_QRG_V4_ML_0801.indd 10 8/2/17 1:49 AM