Toyota Corolla 2004 Скачать руководство пользователя страница 235

Страница: 235 / 272

’04 Corolla_U (L/O 0306)

235

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

CAUTION

Do not include a compact spare

tire when rotating the tires. It is

designed for temporary use only.

WHEN TO USE SNOW TIRES OR

CHAINS
Snow tires or chains are recommended
when driving on snow or ice.

On wet or dry roads, conventional tires
provide better traction than snow tires.

SNOW TIRE SELECTION
If you need snow tires, select tires of

the same size, construction and load

capacity as the originally installed tires.

Do not use tires other than those men-

tioned above. Do not install studded tires

without first checking local regulations for
possible restrictions.

CAUTION

Do not use snow tires other than the
manufacturer’s recommended size, as

this may cause dangerous handling

characteristics resulting in loss of
control. Otherwise, an accident may

occur resulting in death or serious

injuries.

SNOW TIRE INSTALLATION
Snow tires should be installed on all

wheels.

Installing snow tires on the front wheels

only can lead to an excessive difference
in road grip capability between the front

and rear tires which could cause loss of

vehicle control.
When storing removed tires you should

store them in a cool dry place. Mark the

direction of rotation and be sure to install
them in the same direction when replac-

ing.

CAUTION

Do not drive with the snow tires
incorrectly inflated.

Never drive over 120 km/h (75 mph)

with any type of snow tires.

Installing snow tires and

chains

Содержание Corolla 2004

















































































































































































































































































Результаты поиска

Содержание Corolla 2004

Отзывы:

Похожие инструкции для Corolla 2004

Бренды по названию

Популярные бренды

Toyota Corolla 2004, Руководство пользователя

Результаты поиска

Содержание Corolla 2004

Отзывы:

Похожие инструкции для Corolla 2004

Бренды по названию

Популярные бренды