Toyota Corolla 2004 Скачать руководство пользователя страница 23

Страница: 23 / 272

’04 Corolla_U (L/O 0306)

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

2. In front of the vehicle, pull up the

auxiliary catch lever and lift the
hood.

3. Hold the hood open by inserting the

support rod into the slot.

To insert the support rod into the slot,

move it straight up. If it is moved to the
side or toward the inside of the vehicle,

it may become detached.
Before closing the hood, check to see that
you have not forgotten any tools, rags,

etc. and return the support rod to its

clip—this prevents rattles. Then lower the
hood and make sure it locks into place.

If necessary, press down gently on the

front edge to lock it.

CAUTION

After inserting the support rod into
the slot, make sure the rod supports

the hood securely from falling down

on to your head or body.

NOTICE

Be sure to return the support rod to
its clip before closing the hood. Clos-

ing the hood with the support rod up

could cause the hood to bend.

Содержание Corolla 2004

















































































































































































































































































Результаты поиска

Содержание Corolla 2004

Отзывы:

Похожие инструкции для Corolla 2004

Бренды по названию

Популярные бренды

Toyota Corolla 2004, Руководство пользователя

Результаты поиска

Содержание Corolla 2004

Отзывы:

Похожие инструкции для Corolla 2004

Бренды по названию

Популярные бренды