Toyota Celica 2003, Руководство по эксплуатации

Страница: 109 / 280

’03MY CELICA U (L/O 0208)
109
2003 CELICA from Aug. ’02 Prod. (OM20809U)
1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station. (See “TUNE” or
“SEEK”.) Push and hold down the button
until you hear a beep—this will set the
station to the button. The button number
will appear on the display.
To recall a preset station: Push the button
for the station you want. The button num-
ber and station frequency will appear on
the display.
These systems can store one AM and two
FM stations for each button. (The display
will show “AM”, “FM1” or “FM2” when you
push “AM” or “FM” button.)
(Eject button)
Push the cassette tape eject button to
eject a cassette. Push the compact disc
eject button to eject a compact disc.
(Program)
Push “ ” (preset button 4) to select
the other side of a cassette tape. The
display indicates which side is currently
selected (“ ” indicates the top side, “ ”
indicates the bottom side).
Auto–reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
(Reverse/Fast–forward button)
Cassette player
Push “ ” (preset button 6) to fast–for-
ward a cassette tape. “FF” will appear on
the display. Push “ ” (preset button 5)
to rewind a tape. “REW” will appear on
the display.
To stop the tape while it is fast–forward-
ing, push “ ” or “TAPE” button. To stop
the tape while it is rewinding, push “ ”
or “TAPE” button.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast–forwards completely,
the cassette will play the other side of the
tape using the auto–reverse feature.
Compact disc player
Push and hold “ ” (preset button 6) or
“ ” (preset button 5) to fast forward or
reverse within a compact disc. When you
release the button, the compact disc play-
er will resume playing.
AM
Push the “AM” button to turn on the radio
and select the AM band. “AM” will appear
on the display.
AUDIO CONTROL (Tone and sound bal-
ance adjustment function)
Each time you push the “AUDIO
CONTROL” knob, the mode changes. To
adjust the tone and balance, turn the
knob.
BAS: Adjusts low–pitched tones. The dis-
play ranges from –5 to 5.
MID (on some models): Adjusts mid–
pitched tones. The display ranges from –5
to 5.
TRE: Adjusts high–pitched tones. The dis-
play ranges from –5 to 5.
FAD: Adjusts the sound balance between
the front and rear speakers. The display
ranges from F7 to R7.