Toyota C-HR 2017, Руководство пользователя

Страница: 127 / 292

127
1. VOICE COMMAND SYSTEM OPERATION
VO
ICE
CO
MMAND SYSTEM
4
C-HR_Navi_USA_OM10581U_17CY
1
Press the talk switch.

Voice guidance for the voice command
system can be skipped by pressing the
talk switch.
2
If this screen is displayed, select “OK”
or press the talk switch.
 For details about this screen:

P.129
3
After hearing a beep, say a supported
command.
 To display sample commands of the
desired function, say the desired function
or select the desired function button. To
display more commands, select
“More
Commands” .
INFORMATION
● Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The windows are open.
• Passengers are talking while voice
commands are spoken.
• The fan speed of the air conditioning
system is set at high.
• The air conditioning vents are turned
towards the microphone.
●
In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.
●
Normally, it is necessary to wait for a
beep before saying a command. To
enable the ability to talk over prompts
and say commands before the beep,
enable the voice prompt interrupt func-
tion. (

P.69)
● Vehicles without a smart key system:
This system may not operate immedi-
ately after the engine switch is in “ACC”
or “ON” position.
Vehicles with a smart key system: This
system may not operate immediately
after the engine switch is in ACCES-
SORY or IGNITION ON mode.
VOICE COMMAND SYSTEM
OPERATION
The voice command system is operat-
ed by saying commands which corre-
spond to a supported function. To
display examples of commands for
supported functions, select a function
button on the screen after starting the
voice command system.