Toyota AURION, Руководство пользователя

Страница: 241 / 312

IN CASE OF AN EMERGENCY
230
9. Lower the vehicle completely and
tighten the wheel nuts.
Turn the jack handle counterclockwise to
lower the vehicle.
Use only the wheel nut wrench to tighten the
nuts. Do not use other tools or any additional
leverage other than your hands, such as a
hammer, pipe or your foot. Make sure the
wrench is securely engaged over the nut.
Tighten each nut a little at a time in the order
shown. Repeat the process until all the nuts
are tight.
CAUTION
D
When lowering the vehicle, make sure
all portions of your body and all other
persons around will not be injured as
the vehicle is lowered to the ground.
D
Have the wheel nuts tightened with
torque wrench to 103 Nm (10.5 kgf m,
76 lbf ft), as soon as possible after
changing wheels. Otherwise, the nuts
may loosen and the wheels may fall
off, which could cause a serious acci-
dent.
D
Do not attach a heavily damaged plas-
tic wheel ornament. It may fly off the
wheel and cause accidents while the
vehicle is moving.
Steel wheel
Aluminium wheel
10. Reinstall the wheel ornament.
1. Put the wheel ornament into position.
For steel wheels: Align the cut-out of the wheel
ornament with the valve stem as shown.
2. Press hand firmly on one side of wheel
ornament and then firmly tap the other
side around the edge of wheel orna-
ment with the heel of your hand to
snap into place.
CAUTION
Take due care in handling the ornament
to avoid unexpected personal injury.
—Lowering your vehicle —Reinstalling wheel ornament
Not for Reproduction