Toyota AURION, Руководство пользователя

Страница: 115 / 312

GAUGES, METERS AND SERVICE REMINDER INDICATORS
104
This meter displays the odometer and two
trip meters.
1. Odometer—Shows the total distance the
vehicle has been driven.
2. Two trip meters—Show two different dis-
tances independently driven since the last
time each trip meter was set to zero.
You can use one trip meter to calculate
the fuel economy and the other to meas-
ure the distance on each trip. All trip meter
data is cancelled if the electrical power
source is disconnected.
3. Trip meter reset knob—Resets the two
trip meters to zero, and also changes the
meter display.
To change the meter display, quickly
press and release the knob. The meter
display changes in the order from the
odometer to trip meter A to trip meter B,
then back to the odometer each time you
press.
To reset the trip meter A to zero, display
the meter A reading, then press and hold
the knob until the meter is set to zero. The
same process can be applied for resetting
the trip meter B.
The displayed temperature ranges from
--40
_
C (--40
_
F) up to 50
_
C (122
_
F).
The ignition switch must be set to ON.
If an abnormality exists in the connection of
the outside air temperature sensor, “----” or
“E” will appear on the display. If “----” or “E”
appears on the display, contact your Toyota
dealer.
There may be a case that “----” appears mo-
mentarily when the ignition switch is quickly
set to ON. It is normal if it goes out soon.
Odometer and two trip meters
(without multi-information
display)
Outside temperature display
(without multi-information
display)
Not for Reproduction