Toyota 7FBEF 15, Руководство по обслуживанию

Страница: 48 / 185

5-3
(1) Parking brake ON indicator
This indicator comes on when the parking brake is activated. If the accelerator pedal is depressed with
the direction lever in the forward or reverse position, beeps sound to warn the operator.
(2) 2-speed travel speed set indicator
Each time the button is pressed, the indicator comes on or goes out. When this indicator is on, 2-speed
travel speed is on to limit the maximum vehicle speed to the set level.
(3) Diagnosis ON indicator
Blinks when the diagnosis function is activated because of some defect on the vehicle. At the same
time, the corresponding error code is displayed and buzzer sounds to warn the operator.
Up to three error codes can be displayed at a time. When more than three errors occur at a time, up to
six error codes are displayed with alternation at intervals of 2 seconds.
On a SAS model vehicle without matching performed for the SAS function, this indicator comes on to
warn the service person. Perform matching by referring to the MATCHING section.
(4) Overheat warning indicator
If the temperature of the main controller, traveling AC driver, material handling AC driver, drive motor or
pump motor rises beyond the specified level, the overheat warning indicator blinks. At the same time,
a buzzer sounds to warn the operator.
When the indicator is blinking, vehicle operation is restricted and the overheat section indication blinks.
Display Information
Vehicle Operation Restriction when Overheated
Overheat
section
Specifica-
tion
Mode
Description of control
Primary control Secondary control Tertiary control
Main
controller
STD ·
Fisherman
spec (OPT)
H
1. Character indication and indicator blink
2. Buzzer for 5 seconds
3. Change to half throttle
P
S
Traveling
AC driver
STD ·
Fisherman
spec (OPT)
H
1. Character indication and indicator blink
2. Buzzer for 5 seconds
3. Change to half throttle
P
S
Material
handling
AC driver
STD ·
Fisherman
spec (OPT)
H
1. Character indication and indicator blink
2. Buzzer for 5 seconds
3. Restrict material handling output
P
S
3 0 / 9 A M
1 1
:
0 0
S P H
S P H
MENU
Overheat section
Overheat warning indicator
Display information
C/R
DCR
PCR
DM
PM
Overheat section
Main controller
Traveling AC driver
Material handling AC driver
Drive motor
Pump motor
2
3
5