manualshive.com logo in svg

Toyota 62-8FDU15, Руководство по ремонту

Поделиться
Скачать
Toyota 62-8FDU15 Скачать руководство пользователя страница 96

7-94

7 DISPLAY

1ZS Engine Vehicle

Displays ON/OFF states of the 1ZS engine controller switch, various input values including analog input
voltage from the sensor and correction value of the control.

Operating Procedure

Step 1

Display the "ANALYZER MENU" screen.

Switch (1)

Switch (4)

Step 2

Press switch (1) once to check that "2. I/O ENGINE
CTRL" is selected, and press (enter) switch (4) to dis-
play "I/O ENGINE CTRL 1/5" screen.

NOTICE:

▪

You cannot move directly from "I/O ENGINE
CTRL" screen to the screen of the other items.
Return to "ANALYZER MENU" screen once,
then move to screen of each item.

▪

"I/O ENGINE CTRL 1/5"

NE: 

Engine speed(rpm), (Traveling speed(km/h or mph))

Displays engine speed and traveling speed.

BATT: 

Battery voltage (V)

Displays battery voltage.

Standard: 8.0 to 16.0 V

PA: 

Accelerator pedal position (%)

Displays operation amount of the accelerator pedal.
0% (when accelerator is not operated)
100% (during maximum pressing of accelerator)

THW: 

Coolant temperature (°C)

Displays coolant temperature.

Switch (4): To "I/O ENGINE CTRL 2/5" screen

Содержание 62-8FDU15































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды