Toyota 2008 FJ Cruiser, Руководство пользователя

Страница: 300 / 424

278
4-3. Do-it-yourself maintenance
FJ CRUISER_U_(L/O_0804)
n
After changing the engine oil (U.S.A. only)
The oil change system should be reset. Perform the following procedures:
Turn the engine switch off with the odometer reading shown.(
→
P.
124)
Turn the engine switch to the ON position while holding down the
trip meter reset button.
Continue to press and hold the button until the odometer displays
000000.
If the system fails to reset, the light will continue flashing.
CAUTION
n
Used engine oil
l
Used engine oil contains potentially harmful contaminants which may
cause skin disorders such as inflammation or skin cancer, so care should
be taken to avoid prolonged and repeated contact. To remove used engine
oil from your skin, wash thoroughly with soap and water.
l Dispose of used oil and filters only in a safe and acceptable manner. Do
not dispose of used oil and filters in household trash, in sewers or onto the
ground. Call your Toyota dealer, service station or auto parts store for
information concerning recycling or disposal.
l
Do not leave used engine oil within the reach of children.
NOTICE
n
To prevent serious engine damage
Check the oil level on regular basis.
n When replacing the engine oil
l
Be careful not to spill engine oil on the vehicle components.
l
Avoid overfilling, as the engine could be damaged.
l
Check the oil level on the dipstick every time you refill the vehicle.
l
Be sure the engine oil filler cap is properly tightened.
FJCRUISER_U.book Page 278 Wednesday, January 30, 2008 3:32 PM