Toyota 2006 Land Cruiser, Руководство пользователя

Страница: 174 / 364

160
(c) Vehicle height mode changing
condition
To change the vehicle height, it is nec-
essary to meet the following 3 condi-
tions.
$
The engine should be running.
$
All the side doors and back door
should be closed.
$
The height control “OFF” indicator
light should go off.
When selecting a mode with the four-
wheel drive control lever at “H”, there is
a vehicle speed limit. Refer to the follow-
ing table.
Yes = The mode can be selected.
No = The mode cannot be selected.
Low
mode
Normal
mode
High
mode
At vehicle
stoppage
Yes Yes Yes
Under about 30
km/h (19 mph)
No Yes Yes
About 30 km/h
(19 mph) or over
No Yes No
In the following cases the active height
control suspension does not operate
even if the above conditions are all
met.
$
The brake pedal has been depressed
for longer than about 5 seconds with
the vehicle stopped.
$
The suspension fluid temperature is
lower than –30
% C (–22 % F). If the en-
gine is warmed up, the suspension
fluid temperature will be raised as the
inside of the engine compartment be-
comes warmer. Then the active height
control system becomes operable.
$ Driving on the bumpy roads, which
may cause the suspension to fully
elongate.
$
The steering wheel is operated abruptly
more than 3/4 turns with center differ-
ential lock system activated.
(d) Vehicle height adjustment
To change the mode, push the height
select
switch on either side of
“ ”(higher) and “ ”(lower).
The height control indicator light indicates
which mode is selected. (See “(f) Height
control indicator lights” described below.)