Toyota 2006 Land Cruiser Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 364

background image

50

NOTICE

!

Do  not  put  unevenly  weighed  ob-
jects  on  the  seat  and  do  not  stick
sharp  objects  (needles,  nails,  etc.)
into  the  seat.

!

When cleaning the seats, do not
use organic substances (paint thin-
ner,

benzine,

alcohol,

gasoline,

etc.). They may damage the heater
and seat surface.

!

To  prevent  the  battery  from  being
discharged,  turn  the  switch  off
when  the  engine  is  not  running.

Toyota  strongly  urges  that  the  driver  and
passengers  in  the  vehicle  be  properly  re-
strained  at  all  times  with  the  seat  belts
provided.  Failure  to  do  so  could  increase
the  chance  of  injury  and/or  the  severity  of
injury  in  accidents.

The  seat  belts  provided  for  your  vehicle
are  designed  for  people  of  adult  size,
large  enough  to  properly  wear  them.

Child.

Use a child restraint system ap-

propriate  for  the  child  until  the  child  be-
comes  large  enough  to  properly  wear  the
vehicle’s  seat  belts.  (For  details,  see
“Child  restraint”  on  page  78.)

If  a  child  is  too  large  for  a  child  restraint
system,  the  child  should  sit  in  the  rear
seat  and  must  be  restrained  using  the
vehicle’s  seat  belt.  According  to  accident
statistics,  the  child  is  safer  when  properly
restrained  in  the  rear  seat  than  in  the
front  seat.

If  a  child  must  sit  in  the  front  seat,  the
seat  belts  should  be  worn  properly.  If  an
accident  occurs  and  the  seat  belts  are  not
worn  properly,  the  force  of  the  rapid  infla-
tion  of  the  airbag  may  cause  death  or
serious  injury  to  the  child.

Do  not  allow  any  children  to  stand  up  or
kneel  on  either  rear  or  front  seats.  An
unrestrained  child  could  suffer  serious  in-
jury  or  death  during  emergency  braking  or
a  collision.  Also,  do  not  let  the  child  sit
on  your  lap.  Holding  a  child  in  your  arms
does  not  provide  sufficient  restraint.

Pregnant woman.

Toyota recommends the

use  of  a  seat  belt.  Ask  your  doctor  for
specific  recommendations.  The  lap  belt
should  be  worn  securely  and  as  low  as
possible  over  the  hips  and  not  on  the
waist.

Injured person.

Toyota recommends the

use of a seat belt. Depending on the inju-
ry, first check with your doctor for specific
recommendations.

Seat belts—
—Seat belt precautions

«
...
62
63
64
65
66
...
»

Содержание 2006 Land Cruiser













































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2006 Land Cruiser

Бренд: Vauxhall Страницы: 323

Бренд: Chevrolet Страницы: 344

Бренд: Prorack Страницы: 15

MCL-7000 Series

Бренд: Dakota Digital Страницы: 2

Бренд: Volvo Страницы: 284

Бренд: WABCO Страницы: 52

Бренд: MVG Страницы: 18

Бренд: Fiat Страницы: 284

Бренд: Metra Electronics Страницы: 20

3 Facelift 2006

Бренд: Mazda Страницы: 94

Бренд: EUFAB Страницы: 20

Бренд: Poison Spyder Страницы: 5

Omni-Bike Sport Ducato

Бренд: OMNISTOR Страницы: 5

Sprinter Bed System DIY

Бренд: FVC Страницы: 8

Бренд: Curt Group Страницы: 3

Бренд: Juna Страницы: 10

Бренд: AUTOTECH Страницы: 4

Бренд: Ford Страницы: 264

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды