TOX PRESSOTECHNIK CEP400T Скачать руководство пользователя страница 77

Страница: 77 / 126

Software

TOX_Manual_Process-monitoring-unit_CEP400T_en

By tapping the text fields

Measuring value 1

Measuring value 2

the

values of the measured electrical signals can also be changed before
tapping the

Accept calibration

button.

This should, however, only be made when the allocation of the electrical
signal for force is known.

Apply configuration

If a value or a setting has been changed in menu ''Configuration -> Configu-
ration of force sensor'', a request dialog is displayed when exiting the
menu.

In this window the following options can be selected:

Only for this process:

The changes only apply to the current process and overwrite the previ-
ous values/settings in the current process.

Copy to all processes

The changes apply to all processes and overwrite the previous values/
settings in all processes.

Copy to the following processes

The changes are only accepted in the area that has been specified in
fields

From process

to process

. The previous values/settings are

overwritten in the defined process area with the new values.

Cancel entry:

The changes are discarded and the window is closed.

Содержание CEP400T































































































































Результаты поиска

Содержание CEP400T

Отзывы:

TOX PRESSOTECHNIK CEP400T, Руководство пользователя, Страница: 77 / 126

Результаты поиска

Содержание CEP400T

Отзывы: