100001021-50
Linking Remote Handset to the Fireplace
Town & Country Fireplaces can be operated remotely by using the remote handset that came with the fire-
place, and by using a BlueTooth
®
enabled apple mobile device and the “TC Fire” app which can be down-
loaded free from the Apple
®
app store. For linking to the fireplace using a BlueTooth
®
enabled apple mobile
device, refer to the user manual that came with this fireplace. For linking the remote handset that came with
this fireplace, complete the following two steps:
Step 1: Procedure for linking / pairing wall switch to fireplace
1. Set the wall switch selector to the “Remote” setting.
2. Press and hold
Program
button (Figure 51) on the wall switch for up to 10 seconds. Use a straight-
ened paper clip to access the button.
3. The wall switch will beep 5 times. Release the button following the beeps.
4. The fireplace will beep 3 times repeated by another 3 beeps.
5. The fireplace and wall switch are now linked/paired.
If there is cross communication with another nearby fireplace causing the other
fireplace to activate instead of the intended fireplace, repeat above procedure to
automatically switch to another one of three available channels.
Figure 51: Town and Country
wall switch.
PROGRAM BUTTON
32
TCWS54D2 091418-40
