A Firebox Panel Set must be installed for safe operation. Do not use the fi replace without
panels. Unpack and inspect all panels. The panels need to be installed before the logs are
in place.
Caution:
The Firebox Panels are very fragile, and should be handled with care.
1. Remove the Side Panel Retainers located on the underside of the fi rebox heat shield.
The retainers are each held in place by one screw.
2. Install the Left and Right Front Floor Panels.
3. Install the Left and Right Rear Floor Panels.
4. Install the Left Side Panel by inserting the bottom of the panel in fi rst and then angling
it up into position. It may be necessary to push the fi rebox shield up to allow panel to
move freely into place.
5. Install the Right Side Panel.
6. Reinstall Panel Retainers.
(See Porcelain panel instruction manual for specifi c instructions for these panels) Before
proceeding see burner instructions.
TC36 SEE-THRU PANELS
BEIGE HERRINGBONE ...........................................................................TCPN.757241.C
TUSCAN ....................................................................................................TCPN.757151.C
HERITAGE RED BRICK ................................................................................. TCPN.759.C
BLACK PORCELAIN ............................................................................... TCPN.757253.C
COFFEE BEAN BROWN PORCELAIN .............................................. TCPN.757253CB.C
RIGHT FLOOR PANEL
(HERRINGBONE PANEL SET SHOWN)
LEFT SIDE PANEL
REAR LEFT FLOOR PANEL
REAR RIGHT FLOOR PANEL
LEFT FLOOR PANEL
RIGHT SIDE PANEL
26
TC36_CSTE 071010-44
Firebox Panels Installation
Fig. #45
Содержание TC36 SEE-THRUC SERIES
Страница 40: ...40 TC36_CSTE 071010 44 Notes ...
Страница 41: ...41 TC36_CSTE 071010 44 Notes ...
Страница 42: ...42 TC36_CSTE 071010 44 Notes ...