3
TC30_NGO3D_270315-16
5056.42903D
A porcelain panel set must be used
in conjunction with the installation of
the burner assembly. See Installation
and Operating Instructions manual for
details.
1. Remove three screws from the rear of
the firebox. Attach the manifold bracket
to the rear of the firebox with the three
screws previously removed. (Fig. #1)
2. Attach the manifold supply tube and the
pilot supply tube to the bulk head fittings
and tighten. (Fig. #2) Ensure that there
are no leaks.
NOTE: If unit is to be converted to Propane,
see Propane conversion instructions on
page 7 before proceeding.
NOTE: Plug the 4 vacant holes in the
bottom of the firebox with 1/2” screws,
as they are not required to attach this
style of burner.
Black Diamond Burner Installation
Fig #1
Fig #2
