Thermostatic Mode
(Only for use where permitted)
(Operates the fireplace within a set tem-
perature range)
The fireplace is shipped with thermostatic
mode function deactivated. If this function
is permitted for use in your area it can be
activated by depressing the recessed button
on the
underside of the hand held remote
.
(Fig #55) Once activated the thermostat
symbol (Fig #56) will be displayed when the
thermostat button is pressed.
To activate a set point temperature:
1. Press the thermostat button to activate
the thermostat mode. The temperature
and thermostat symbols will appear.
2. Press and hold the thermostat button
on the lower right hand side of the hand
held remote for 5 seconds. (Fig #59) The
temperature icon on the display will flash.
(Fig #58)
3. While the temperature icon is flashing
use the up and down arrows to set the
temperature to the desired setting.
4. Once the desired setting is reached,
press the OK button. If the OK button is
not pressed the icon will continue to flash
for 5 seconds and then set itself to the
temperature displayed.
5. The fireplace is now in thermostatic mode.
To exit the thermostatic mode press the
program, manual or timer buttons. Please
note that the first press of the manual
button will turn the fireplace off.
THERMOSTATIC MODE
BUTTON
Fig. #56
THERMOSTAT SYMBOL
THERMOSTATIC BUTTON
Fig. #55
Fig. #57
TEMPERATURE SETTING
Fig. #58
33
TC30_CE3 250313-
Содержание TC30.CE3
Страница 42: ...42 TC30_CE3 250313 44 Notes ...
