background image

100001022

Fireplace Description

 

The Proflame 2 Remote Control Fireplace consists of three elements: 

1.  Proflame 2 Remote Control Transmitter.
2.  Proflame Integrated Fireplace Control (IFC) board and a wiring harness to connect the IFC to the    

 

gas valve and stepper motor. 

3.  Wall mounted Remote Control Receiver Figure 3, Figure 4 and Figure 5.

Transmitter (Remote Control with LCD Display)

The Proflame 2 Transmitter uses a streamline design with a simple key layout and an informative LCD display 
(Figure 2). The remote control transmitter is powered by 3 AAA batteries. A mode key is provided to index 
between the features and a thermostat key is used to turn on/off or index through thermostat functions 
(Figure 1).

IFC Module

The Proflame 2 Integrated Fireplace Control (IFC) module is a device that allows automatic ignition and pilot 
flame supervision and commands the functions of the fireplace. It’s configured to control the ON/OFF main 
burner operation, giving the choice of both IPI (intermittent pilot ignition), and CPI (continuous pilot ignition) 
modes. The Proflame2 IFC module controls and connects directly to the pilot assembly and the automatic 
valve using low electric power.

The IFC module can be powered by both an AC power supply, and battery pack for back up. The Proflame 
2 offers the added ability to control the comfort fan speed from OFF through six (6) speeds, and a remotely 
actuated auxiliary outlet and a dimmable light outlet. The external batteries can provide DC power to the IFC 
allowing the batteries to be used only when line power is interrupted or lost, and if the fireplace does not use 
a combustion fan.

Operating Procedure

The fireplace must first be linked to the wall switch. Then the wall switch must be linked to the remote hand-
set. Instructions for both of these procedures including instructions for enabling a Blue Tooth® enabled apple 
mobile device to the fireplace, see See “Linking Remote Handset and apple® Device to Fireplace” on page 
11.

7

TCWS54D2_181019-20

Содержание D Series





















Отзывы: