3
you are going to fl y your Laser on a 2S (7.4V) or 3S (11.7V)
battery—of course it can be fl own with both. Powered by a
2S battery the Laser is lighter and will fl y slower, precision
maneuvers better. Powered by a 3S battery the Laser will
fl y 3D maneuvers better. Following is the list of components
the Laser was designed to fi t. Any other gear with similar
specifi cations will be suitable, but slight modifi cations may
be required.
❍
RimFire 250 Outrunner motor (GPMG4502)
❍
Futaba R6004FF micro receiver (FUTL7624)
❍
(3) Futaba S3154 digital micro servos (FUTM0654)
OR
❍
(3) Futaba S3114 micro servos (FUTM0414)
Suitable batteries:
❍
FlightPower 2S 350mAh LiPo (FPWP2032)
and/or
❍
FlightPower 3S 350mAh LiPo (FPWP2033)
❍
FlightPower 10A brushless ESC (FPWM0210)*
-and-
Deans
®
micro connector (WSDM3007)
OR
❍
Great Planes Silver Series 12A Brushless ESC
(GPMM1810)
❍
LiPo battery charger (GPMM3155)
❍
Charge Lead (GPMM3149)
❍
APC 8 x 3.8 propeller (APCQ5000)
It is also recommended that you stock up on spare propeller
saver O-rings (GPMG1405)
*The FlightPower ESC comes with a JST battery connector
while the FP batteries come with a Deans Micro connector,
so the battery connector on the ESC must be converted to
Deans to fi t the battery (WSDM3007). If a fl ight-ready ESC
that doesn’t require soldering connectors is preferred, the
Great Planes SS-12 Brushless ESC is suitable (GPMM1810).
Tools and Adhesives
Other than ordinary hobby tools, the only other tool required to
assemble your Laser 200 is a light or medium-duty soldering
iron for heating the shrink tubing for joining the carbon fi ber
pushrods to the metal Z-bend pushrod ends. Otherwise, foam-
safe CA is used for assembly. Both Thick and Thin CA are
useful, but if you had to use only one kind Thick is preferred.
Additionally, some types of CA accelerator perform better
than other types on fl at foam. Great Planes Aerosol CA is
recommended:
❍
Thick, foam-safe CA (HOTR1050)
❍
Thin, foam-safe CA (HOTR1040)
❍
CA applicator tips (HCAR3780)
❍
Dubro Double-Sided Servo Tape (DUBQ3551)
❍
Great Planes Pro CA Foam-Safe Aerosol Activator
(GPMR6034)
KIT INSPECTION
Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not
of acceptable quality, or if you need assistance with assembly,
contact
Product Support
. When reporting defective or missing
parts, use the part names exactly as they are written in the
Kit Contents list.
Great Planes Product Support
3002 N Apollo Drive, Suite 1
Ph: (217) 398-8970, ext. 5
Champaign, IL 61822
Fax: (217) 398-7721
E-mail: [email protected]
KIT CONTENTS
Содержание Laser 200 Flatty
Страница 16: ......