background image

I N S T R U C T I O N   M A N U A L

READ THROUGH THIS MANUAL

BEFORE STARTING CONSTRUCTION.

IT CONTAINS IMPORTANT INSTRUCTIONS 

AND WARNINGS CONCERNING THE 

ASSEMBLY AND USE OF THIS MODEL.

WEIGHT

28 – 30 oz [795 – 850 g]

WING LOADING

14.9 – 15.9 oz/sq ft [45 – 49 g/dm

2

]

RADIO

4-Channel

MOTOR

1000kV Outrunner, 30A ESC,

9 x 4.5 SlowFlyer Propeller

Tower 

Hobbies

®

 

guarantees 

this kit to be 

free from defects 

in both material and 

workmanship at the 

date of purchase. This 

warranty does not cover any 

component parts damaged by 

use or modification. In no case 

shall Tower Hobbies’ liability exceed 

the original cost of the purchased kit. 

Further, Tower Hobbies reserves the right to 

change or modify this warranty without notice.
In that Tower Hobbies has no control over the final 

assembly or material used for final assembly, no 

liability shall be assumed nor accepted for any damage 

resulting from the use by the user of the final 

user-assembled product. By the act of using the 

user-assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated with the 

use of this product, the buyer is advised to return this kit immediately in 

new and unused condition to the place of purchase.
To make a warranty claim send the defective part or item to Hobby Services at 

the address below:

Hobby Services • 3002 N. Apollo Dr.  Suite 1 • Champaign IL  61822 • USA

Include a letter stating your name, return shipping address, as much contact information 

as possible (daytime telephone number, fax number, e-mail address), a detailed description 

of the problem and a photocopy of the purchase receipt. Upon receipt of the package the 

problem will be evaluated as quickly as possible.

W

AR

R

AN

TY

Entire Contents

© 2012 Tower Hobbies

TOWA2002

®

®

TOWER HOBBIES

Champaign, Illinois

 (217) 398-8970 ext. 5

WINGSPAN

39 in [990mm]

WING AREA

271 sq in [17.5 dm

2

]

LENGTH

31 in [785mm]

[email protected]

Содержание F40 Corsair









Отзывы: