Tower Hobbies 424, Руководство пользователя

Страница: 14 / 16

14
ONLY ONE SERVO GLITCHES:
Servo is bad – replace the servo or send to Hobby Services for repair.
FAILSAFE NOT WORKING CORRECTLY:
Rx not properly linked to the Tx – re-link and re-try. Contact Hobby Services for
further details.
WIRELESS TRAINER FUNCTION NOT LINKING: Confi rm that another Tower
Hobbies or Tactic brand 2.4GHz system or radio utilizing the SLT protocol is not
on in your area. The teacher’s and student’s transmitters were not powered in the
proper sequence or are positioned too far from each other. Carefully follow the
instructions on page 5 for proper linking and operation for training.
RECHARGEABLE BATTERIES WON’T ACCEPT CHARGE THROUGH THE TX:
Check the charger for proper setup and operation. Make sure the charge plug is
inserted fully into the charge jack. Make sure the Tx power switch is in the OFF
position. Make sure the cells are inserted inside the battery compartment in the
proper direction.
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Rf Radiated Exposure Statement: The equipment complies with FCC Rf
radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT.
FCC ID: IYFTTX600PA