7
The following connection instructions apply to both Synergy
®
BT Pro-Plus jacket
and vest when used separately from Synergy
®
BT Pro-Plus Pant. (For connection
with pant, see pages 10-11)
1. Remove male end of connecting plug located inside zippered storage pocket found
on left side of the interior of the jacket and vest.
2. With vehicle motor running, firmly plug the male end of connecting cord into the
female plug of the power lead harness that has been properly installed on your
vehicle’s battery system using the instructions provided in this manual
(see pages 4-5).
4. With garment securely connected, your jacket or vest is safe to turn on and operate
using the built-in waterproof 3-setting LED smart soft touch controller or Bluetooth
®
App.
(Smart soft touch controller instructions can be found on page 13-14.
Bluetooth
®
operating instructions on separate sheet included with garment.)
NOTE: Firmly plug in all connectors to ensure no metal is showing.
CAUTION: Prior to use, double check that wiring does not interfere with
normal operation of your vehicle.
3a. (OPTIONAL): If you have purchased Synergy
®
Pro-Plus gloves or glove liners and
wish to use them with your Synergy
®
BT Pro-Plus heated jacket at this time, follow
the instructions below:
1. Locate and remove male ends of connecting plugs found inside zippered
storage pockets on lower sleeves of your Synergy
®
BT Pro-Plus jacket.
2. Firmly insert male ends of connecting plugs into the female ports on
your
Synergy
®
Pro-Plus gloves or glove liners.
3b. (OPTIONAL): To use Synergy
®
Pro-Plus gloves or glove liners with Synergy
®
BT
Pro-Plus heated vest, you will need to purchase a 150cm Y-splitter (Part# 8763-
9913-00) and standard Y-splitter (Part# 8763-9912-00) to complete the connection.
(See diagram for order of connections)
Option 1: Synergy
®
BT Pro-Plus 12V Heated Jacket (with optional gloves or glove
liners) or Vest Connection Instructions
