12
Option 4: Synergy Pro-Plus 12V Heated Gloves or Glove Liners Connection
Instructions
1. Install single power harness to your vehicle’s battery system using installation
instructions provided on pages 4-5 of this manual.
(NOTE: Synergy
®
Pro-Plus 12V battery harness (part #8763-9901-00) available
for purchase separately from your authorized Tourmaster
®
Synergy
®
dealer or
online at: www.TOURMASTER.com)
2. Connect male plug of the 150cm extended glove splitter (part #8763-9913-00)
firmly into the female plug of the power harness.
3. Route one male end of the 150cm extended glove-splitter through each of the
jacket sleeves, with the male ends exiting the jacket cuffs.
4. Firmly insert male ends of connecting plugs into the appropriate female ports of
your Synergy
®
Pro-Plus gloves or glove liners.
5. With garment securely connected, your Synergy
®
Pro-Plus gloves or glove liners
are safe to turn on and operate using the built-in waterproof 3-setting LED smart
controller.
(Instructions on using controller can be found on pages 13-14)
NOTE: Firmly plug in all connectors to ensure no metal is showing.
CAUTION: Prior to use, double check that wiring does not interfere with
normal operation of your vehicle.
PLUG MALE CONNECTOR INTO
FEMALE CONNECTOR OF POWER
LEAD HARNESS.
150CM Y-SPLITTER
(PART #: 8763-9913-00)
