4
Please use the following instructions in conjunction with your vehicle’s factory supplied
owners manual to properly install the Synergy
®
Pro-Plus power lead wiring harness.
WARNING: To avoid any safety hazards, electrical malfunctions or
damage to the vehicle, it is important the following disconnection
and reconnection steps be followed step by step during installation.
Have the vehicle’s manufacturer supplied owner’s manual available.
1. Turn off vehicle and remove the key from the ignition.
2. Locate and access the vehicle’s 12-volt battery, in accordance with your vehicle’s
manufacturer supplied owner’s manual.
3. Disconnect the vehicle’s negative (-) cable from the battery by removing
the attachment screw and lifting the cable off of the battery terminal.
4. Disconnect the vehicle’s
positive (+)
cable from the battery by removing
the attachment screw and lifting the cable off of the battery terminal.
5. Connect the
positive (+)
wire from the Synergy
®
Pro-Plus power lead wiring
harness to the
positive (+)
battery terminal and then reconnect the vehicle’s
positive (+)
cable to the
positive (+)
battery terminal. Be sure to securely
fasten the attachment screw. (The
positive (+)
wire from the Synergy
®
Pro-Plus
power lead wiring harness is marked with a red colored end and is connected
to the 15 Amp fuse)
Synergy
®
Pro-Plus Power Lead
Wiring Harness Installation
(+) Battery Cable
(-) Battery Cable
Synergy™ Power Lead
